Product Description

Worm Gearbox / Double Enveloping Worm Reducer / Mix Reducer

Solution Description

Characteristic of Sgr Substantial Efficiency, Minimal Noice Cone Worm Sequence Worm Gearbox   : In a Worm Gearbox, Worm Reduction Gear Box, Worm Velocity Reducer and Equipment Motor Company, three to eleven equipment enamel are normally in contact with the worm, dependent CZPT the ratio. The improved variety of pushed equipment tooth that are in contact with the worm significantly will increase torque capacity also raises shock load resistance. In addition to growing the amount of driven equipment teeth in contact with the worm, Worm Gearbox, Worm Reduction Gear Box, Worm Pace Reducer and Gear Motor Manufacturer also boosts the make contact with spot on each and every gear tooth. The real locations of instantaneous make contact with between the worm threads and the pushed gear tooth are strains. These strains of get in touch with go across the face of the equipment tooth as it progresses via its whole time of mesh with the worm. The strains of contact in double-enveloping worm gearing are configured to improve the energy transmission capacity and lessen the stress on every gear tooth.

 

Datasheet on CUW double enveloping worm equipment reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Energy Ratio Permitted Torque Excess weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
a hundred 28 one hundred ninety 48 1.forty one~11.5 10 .twenty five~ 62 683-1094 forty two
125 32 225 fifty five 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 sixty five three.ninety four~25.9 10 .25 ~ 62 1555 ~ 3473 85
a hundred and sixty 42 290 70 four.39~35.seven 10 .25 ~ 62 2143 ~4212 120
one hundred eighty forty eight 320 eighty five.83~forty seven.five 10 .25 ~ 62 2812 ~ 5387 170
200 fifty five 350 90 7.52 ~sixty one.two 10 .25 ~ 62 3624 ~6859 220
225 60 390 one hundred 9.9~81.four 10 .25 ~ 62 4872 ~ 9224 290
250 sixty five 430 110 twelve.9 ~a hundred and five 10 .25~ 62 6284~11892 380
280 70 480 one hundred twenty 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 one hundred forty 22.5 ~183 10 .25 ~ 62 11068~ 19450 seven-hundred
355 80 595 a hundred and fifty 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 one hundred seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 forty two.6 ~347 10 .25 ~ 62 2571~39881 1980
500 one hundred ten 815 210 fifty four.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

 

 Double-enveloping worm gearbox figure :

(Click on on photograph for more data)

 

 

Packaging & Shipping

Bundle :                                                                                                

SGR gearbox use common wooden circumstance for each equipment gear unit.

 

Shipping :                                                                                               

According to Client necessity, we shipping merchandise by various transportation, Sea transport, Air Transportation / Categorical or Truck transportation and many others.

You Appoint, We Services!

Our Providers

With all our pursuits DNV-ISO 9001, SGS -licensed, we stand for best-quality provider. Entrusting your gearboxes to the treatment of our Providers.

Support defend your gearbox from dress in and grinding, SGR gearbox converts torque reliably and effi­ciently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular design and style helical gear unit, worm gearbox, cycloidal gearbox and so on to suit your software and meet up with your demands. 

These attributes permit a dependable and secure service daily life of in excess of 200 000 operational hours. 

Our consumers have been putting their believe in in CZPT equipment units since 1997. More than five hundred 000 gear models of our gearbox are in use reliably close to the world, in many situations under extremely harsh circumstances.

 

Our Honour and Patent :                                                                                                      

ABOUT US:                                                                                         

ZheJiang CZPT Heavy Industry Machinery Co., Ltd.(previously known as ZheJiang CZPT Reducer Co., Ltd. ) (sgrgear)  has amassed rich authentic creating & manufacturing encounter following becoming founded in 1996. CZPT model planetary gear reducer has won honor of “Science and Technologies Advancement Prize” awarded by the National Speed Reducer & Variator Sector Affiliation.

We generate planetary gear units, planar double-enveloping worm gear speed reducers (cone worm equipment reducer), helical-bevel gear motors, worm gear reducers, helical worm equipment motors, helical equipment motors and a lot of other kinds of equipment models. CZPT equipment motors and equipment models have offered satisfactory overall performance in diverse industrial purposes, like metallurgy, mineral, architecture, shipbuilding, petroleum mixture, aviation room-flight, lift routeing, textile mechanic, cement, prescription drugs, pumps, standard mechanic and other area.

With the advantage of substantial top quality & competitive price, CZPT equipment motor and gear models are widely welcomed in the domestic market and exported to Southeast Asia, Middle Asia, North America and European nations around the world and many others.

With the exceptional tests program, CZPT business is usually retaining up with the most sophisticated technology in the planet. We have currently acquired DNV-ISO9001: 2008 certification,SGS, CE etc and a patent on CZPT branded gearbox. 

We have adopted innovative CAD and CIMS in style & manufacture, which aid our engineers build 3 – 5 sequence of new productive items each yr. All employees in sales & provider department are well qualified termly, hence you will be constantly warmly welcomed and comprehended by our organization.

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: 90 Degree Angle
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700
Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: 90 Degree Angle
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

Choosing an Agricultural Gearbox

When buying an agricultural gearbox, there are many important things to consider. These factors include durability, function, mechanism, quality of materials, and ease of use. To find the best option for your specific needs, you should consider the features that are most important to you. Read this article to learn more about the various types of agricultural gearboxes available on the market. When looking for a new gearbox for your tractor, take a look at the following factors to consider.
agriculturalparts

Durability

Agricultural gearboxes are essential parts of the food production chain. If a single component fails, it will cause downtime, affecting production and costs. If the gearbox is not durable, it could result in costly downtime, causing large losses for the farmer. To ensure long-term productivity, select a durable agricultural gearbox. Here are some features to look for in a durable agricultural gearbox. – It’s easy to access and maintain
– Closed-loop seals are an effective alternative to desiccant breathers. They don’t keep water in the gearbox, but they do isolate the gearbox from the atmosphere. Proper isolation of the gearbox is essential to the safety of the equipment. A closed-loop elastomeric seal prevents water from entering the gearbox. This prevents it from overheating and keeping the gears running smoothly.
– Simulated test data was obtained for 44 tractors with different transmission operating parameters. The amplitude of load, frequency of failure, and pseudo-damages were calculated for each component. The statistical analysis also provided an estimate of the severe-damage profile of the gears. Using an optimisation technique, an accelerated test schedule was designed. The test plan was designed to maximise the torque applied to each component. Moreover, all gear wheels in the transmission were not tested, as only the range shift A and B gears were damaged.
If you are interested in purchasing a quality agricultural gearbox, contact CZPT Gearbox Company. CZPT Gearbox Company has been manufacturing top-quality gear drives since 1975. The company’s engineers will work with you to determine the exact gearbox that fits your specific needs. Agricultural gearboxes are integral parts of agricultural machinery, ensuring optimal performance of the machine. Agricultural gearboxes transfer the power from the input shaft to the output shafts and enable it to change direction, speed, and rotation.

Function

Agrarian gearboxes play an important role in the entire cycle of food production. Agricultural equipments are constantly undergoing increased wear and tear, which can cause expensive downtime. Having a high-quality agricultural gearbox is critical to ensuring the equipment’s reliability. When the gears get worn out, the machinery will fail to meet the increased demand. Worn-out gears will result in significant losses for farmers.
The most common use for agricultural gearboxes is to change the speed of agricultural equipments such as tractors and combines. In general, reduction boxes change speed through gears, but the PTO gearbox also bears the force generated by the wind wheel and the reaction force during transmission. To keep the gearbox rigid and prevent deformation, it must be designed to withstand the force exerted by the wind and the reaction force generated during the transmission process. Two sector gears are used to change the direction of transmission.
An agricultural gearbox has two parts: an input shaft 32 and an output shaft 38. The input shaft 32 is fixed in the gearbox’s elongate casing. The output shaft 38 extends parallel to the input shaft and the output shaft, while the rear end portion 40 projects out of the gearbox casing. The output shaft is connected to a second transmission shaft 42, which connects to a differential 44 in the rear axle casing 15. The differential is then connected to the rear wheels of the tractor, where the motion is transferred.
The PTO shaft was first used with the 1948 Land Rover. Later, a 6-spline adapter was added. Today, many manufacturers of agricultural equipments provide a nominal PTO power specification. This specification is a useful guide when choosing the right gearbox for your needs. Agricultural machines may include a 540/540E or 1000/1000E option. Using the lowest PTO power specification will allow you to run implements with low power requirements, thereby reducing fuel consumption and reducing engine stress.
agriculturalparts

Mechanism

The mechanism of an agricultural gearbox is a simple mechanical device that provides speed increase or gear reduction. A simple gearbox is commonly used in agricultural equipment that is powered by a PTO, as the axial PTO shaft is opposed to the normal driven shaft. The driven shaft is usually either vertical or horizontal. More complex equipment has several output directions. Some agricultural gearboxes feature dual or even multiple outputs. The mechanism for an agricultural gearbox varies with the type of equipment.
Agricultural tractors have an internal combustion engine 10 and a speed change gearbox 12. The gearbox casing is elongate and attached to the rear end of the cylinder block. The gearbox casing is a “backbone” between the back axle and the internal combustion engine. Its function is to transmit motion from the engine to the rear wheels of the tractor. There are two types of agricultural gearboxes: speed change gearboxes and planetary gearboxes.
Agricultural gearboxes are crucial for the production of food. Wear and tear on agricultural gears will cause costly downtime. Consequently, high-quality agricultural gearboxes are essential for ensuring the optimal performance of your agricultural machinery. If the gears wear out, your equipment may not meet the increasing demand. This will result in significant losses for the farmer. However, if you choose a high-quality agricultural gearbox, you won’t have to worry about this.
The central knife drive gearbox 300 is illustrated in FIG. 11. The gearbox receives a rotational input motion and outputs a reciprocating linear motion to a harvesting head assembly. In this way, the harvesting head will be most effective when it has linear motion, whereas curved motions will result in less efficient crop picking. The same principles apply to curved blades. If the gearbox is equipped with a central knife drive, it will provide the highest efficiency when harvesting crops.

Quality of materials

Agricultural gearboxes play an important role in the food production process. As the population continues to grow and the world’s need for food increases, the gearbox will also be required to function efficiently. The gearbox must be able to withstand harsh environmental conditions and the stresses and strains of continuous operation. These conditions can include a wide range of high and low temperatures, arid and moist environments, and even safety regulations.
For example, the material used for a tractor gearbox is typically grey cast iron, which has high wear resistance and vibration dampening properties. The production process for belt pulleys is usually a combination of forging and casting. Large belt pulleys are typically cast iron. In addition, the brake drum material used must be resistant to vibration. For this reason, grey iron ASTM A48 Class 35 is used for these components.
Bevel gearboxes are a great choice for many agricultural machinery applications. These gears feature high reduction ratios of 2.44:1 and can be used with offset rotary fillers and hollow output shafts. Bevel gear drives are available in various horsepower capacities, ratios, and configurations. An example of a right-angle bevel gear drive is the FG55 model. It features a 15-mm shaft diameter, which makes it a great choice for many types of agricultural machinery.
agriculturalparts

Cost

When deciding what type of agricultural gearbox to purchase, you should consider the durability of the device. The durability of any mechanical device depends on the quality of its materials, mechanisms, and functionality. Buying a high-quality, durable device will prevent you from having to buy a new one in a few years. In addition, a high-quality gearbox will not wear out as quickly as one that is not built to last.
To find the best agricultural gearbox supplier in India, use a marketplace such as CZPT. It has a global network of suppliers that makes it easy to source your agricultural gearbox needs from any country. Search for Agriculture Gearbox suppliers by city, state, and service area to find a high-quality supplier. Once you’ve done your research, you can then compare prices and quality to find the best deal. And don’t forget to compare the reliability of your chosen supplier.
A dependable company will offer a warranty on their work. Regardless of whether you purchase an OEM or a replacement, you’ll be able to find a reliable, affordable agricultural gearbox from a reputable company. CZPT offers free estimates for their services, and has helped many other farm owners replace their gearboxes with new ones. Moreover, they can even rebuild the gearbox for you, reducing your cost and improving the efficiency of your machine.
China Worm Gearbox / Double Enveloping Worm Reducer / Combination Reducer     agricultural pto gearbox	China Worm Gearbox / Double Enveloping Worm Reducer / Combination Reducer     agricultural pto gearbox
editor by czh 2023-03-24